Infra-Metals Atlanta, GA and Petersburg, VA have increased their processing capabilities with the addition of the Kinetic K3000 and K5000 machine lines. Both machines are combination cutting and drilling machines capable of drilling, milling, tapping, counter-boring, marking, plasma cutting, flame cutting, bevel cutting and automatic tool changing.
Additional specifications:
K3000 – Petersburg, VA
4 oxy fuel torches
2 plasma torches 400 amp w/bevel head
Plasma Bevel, A, V, X, Y & K bevels up to 2” thick
Drill- 3/16” Thru 1-1/4” diameter
Drill with 24 tool changer
Tap- 1/4”-20 thru 5/8”-11
Milling- slot milling and face milling
Counterbore, Countersink
Bed 10’-8”wide X 85’ long down draft table
Capable of holding four 96” X 240” plates at one time
K5000 – Atlanta, GA
2 oxy fuel torches
2 plasma torches 400 amp w/bevel head
Plasma Bevel, A, V, X, Y & K bevels up to 2” thick
Drill with 24 tool changer
Drill- 3/16” Thru 4” diameter
Tap- 1/4”-20 thru 1-1/4”-7
Milling- slot milling and face milling
Counterbore, Countersink
Bed 10’-8”wide X 65’ long down draft table
Capable of holding Three 96” X 240” plates at one time
Both machines installed and operational first quarter of 2016.